Base stabilization,

lifting of foundations, floors and other reinforced concrete frames

SERVICES BY TYPES OF BUILDINGS AND STRUCTURES

back-img

WHY WE ARE THE BEST IN OUR BUSINESS

1

Technology development since 1978

2

Guarantee on works and safety from 5 years

3

European technologies and standards

4

I Individual selection of materials and technical solutions for a particular project

5

Extension of facility lifetime and its cost

6

Environmentally friendly technology and waste management

7

Before starting works with geopolymer injection technology, our specialists were trained by our colleagues from Great Britain, Germany and the Netherlands.

DEEP STABILIZATION METHOD

Strengthening of buildings and structures foundations base soils.
Eliminate causes of cracks, warping and building tilt.
Guaranteed solution and a visible result.

1

DEEP STABILIZATION

  • 01
    THE WHOLE COMPLEX OF WORKS: FROM AUDIT AND INSTRUMENTAL INSPECTION TO WORKS AND POST-PROJECT MONITORING.
  • 02
    WITHOUT STOPPING THE FACILITY OPERATION AND BUSINESS PROCESSES.
  • 03
    WITHOUT IMPROVEMENTS AND ADDITIONAL INVESTMENTS.
  • 04
    INSTANT VISIBLE AND INSTRUMENTALLY PROVED RESULT.
  • 05
    CLEANLINESS AND ORDER BEFORE AND AFTER WORK.
  • 06
    EU STANDARD.

SLAB LIFTING METHOD

Packing voids and floors leveling.
Stabilization of floor structures.
Elimination of deformations and their causes.
Unique materials with adaptive properties.

2

SLAB LIFTING

  • 01
    SURVEY, PREPARATION OF DOCUMENTATION, BUDGETING, TIMING.
    First inspection of the object and consultation of a specialist – free of charge.
  • 02
    DRILLING 8-26 MM HOLES, SETTING OF PACKERS AND INJECTION OF POLYMER MORTAR INTO THE PROBLEM AREA.
    On the local area 1,5 * 1,5 m.
  • 03
    EXPANDING WITH FORCE UP TO 10 MPA, THE POLYMER MORTAR FILLS THE VOIDS, CONNECTS, STRENGTHENS AND STABILIZES THE BASE SOIL.
    Implementation of an average project – from 8 hours to two days of working time.
  • 04
    MEASURING AND RECORDING OF WORKING RESULTS WITH MEASURING EQUIPMENT.
    Accuracy +/- 0.5 mm. Warranty from 5 years.

STATI-CAL TECHNOLOGY

OUR OFFICIAL PARTNER FOR CRACK REPAIR AND WALL STRENGTHENING

3

Stati-CAL

  • 01
    Inspection, identifying the cause of cracking, preparation of conclusions and reports,
    developing a project of works and estimates.
    Specialist consultation and site visit for
    auditing, inspection, and collection of information on the territory of Ukraine.
  • 02
    Execution of works on repairing cracks and reinforcement of walls with the help of pre
    tensioned Stati-Bar rebar.
    Reinforcement is mounted into the body of the wall using a special
    chemical mortar, which takes 30-40 minutes to harden.
  • 03
    Implementation of works on the repair of building the parts by Stati-Tie method. Anchors up to 1,200 mm long fix the transverse units of the building and the units of the well masonry.
    The anchors are installed on a base of chemical mortar or in a prepared hole in the wall by hammering with a punch.
  • 04
    As a result of the work, the building requires minimal facade cosmetic repairs, and in the
    case of brick, the consequences of the work are not noticeable and do not require
    reconstruction.
  • 05
    Fixing the result of the work using geodetic equipment.
    The warranty for the absence of
    cracks and deformations is – 5 years.
AUTO CENTER IN KYIV

AUTO CENTER IN KYIV

  • Target:

    Soils stabilization in foundations base

  • Location:

    Kyiv, Ukraine

  • Technology:

    Deep Stabilization

  • Year:

    2016

AUTO CENTER BUILDING IN OBOLONSKYI DISTRICT OF KYIV

AUTO CENTER BUILDING IN OBOLONSKYI DISTRICT OF KYIV

  • Target:

    Soils stabilization at the foundations base

  • Location:

    Kyiv, Ukraine

  • Technology:

    Deep Stabilization & Slab Lifting

  • Year:

    2015

FOOD FACTORY PRODUCTION DEPARTMENT IN KYIV REGION

FOOD FACTORY PRODUCTION DEPARTMENT IN KYIV REGION

  • Target:

    Soils stabilization at the foundations base of the production building

  • Location:

    Kyiv, Ukraine

  • Technology:

    Deep Stabilization

  • Year:

    2018

GRAIN LOADING DEVICE ON THE RAILROAD

GRAIN LOADING DEVICE ON THE RAILROAD

  • Target:

    Soil stabilization at the foundation base

  • Location:

    Zhytomyr region, Ukraine

  • Technology:

    Deep Stabilization

  • Year:

    2019

RESIDENTIAL BUILDING IN SOLOMIANSKYI DISTRICT OF KYIV

RESIDENTIAL BUILDING IN SOLOMIANSKYI DISTRICT OF KYIV

  • Target:

    Stabilization of the soil base of the floor slab, lifting the floor slab

  • Location:

    Kyiv, Ukraine

  • Technology:

    Deep Stabilization & Slab Lifting

  • Year:

    2015

RESIDENTIAL HOUSE IN OBOLONSKYI DISTRICT, KYIV

RESIDENTIAL HOUSE IN OBOLONSKYI DISTRICT, KYIV

  • Target:

    Soils stabilization in the private house foundation

  • Location:

    Kyiv, Ukraine

  • Technology:

    Deep Stabilization

  • Year:

    2015

STRENGTHENING AND CONSOLIDATION OF BUILDING FOUNDATIONS

Unstable foundation base and weak foundation of a house.

Using the GeoResin injection technologies, we improve the foundation soils bearing capacity. We can raise and level a sloped building, fix its position, strengthening the soil, stopping foundation sagging.

Our experienced engineers and technicians choose the best solution, creating a design that meets the requirements of your house. An armed foundation is a comfortable future for your house. Compared to concreting or placing piles under the foundation, GeoResin technologies are like keyhole surgery because the injection holes are as small as the size of a five-penny coin.

    DO YOU STILL HAVE QUESTIONS?

    Our experts will be happy to consult you. Please fill out this short form so we can contact you.